09-07-2016, 09:33 PM | #1 |
Member
Incubating
Join Date: Jun 2011
Posts: 199
|
Problem with thermostat & digital timer
Hi everyone,
I've just changed to the habistat dimming thermostat with day/night facility. When I try and use this with my digital timer it blows the fuse inside the thermostat. When I use an old 24 hour analogue timer it works fine, part from the timer looses minutes everyday, but it doesn't blow the fuse. Does anyone have an idea of how I can get the thermostat and digital time to work together?? I'd appreciate any advice?
__________________
|
09-07-2016, 09:35 PM | #2 |
Senior Member
Adult
Join Date: Jun 2013
Location: SE England
Posts: 4,262
|
sorry no, but interested in your post because I have analogue not digital. CB
__________________
Horsfields, Spur Thighed, & Marginata |
10-07-2016, 07:27 AM | #3 |
Senior Member
Adult
Join Date: Jul 2011
Location: Wiltshire
Posts: 5,675
|
Hi
I had the very same problem when I got two new ones the old one I had was fine for years until it finally died. I contacted the manufacturer and they said to put a bigger fuse in it which didn't seem to be such a good idea in my mind as if you read their discamers it says the warenty will be void if anything is is changed. So I contacted the people who I purchased and told them and they took them back with no problems at all. And now I have a nice shiny new istat which apparently is all singing and dancing but as yet not come out of the box as everything is outside. |
12-07-2016, 10:08 PM | #4 |
Member
Incubating
Join Date: Jun 2011
Posts: 199
|
Hi, thanks for the replies guys. I phoned the supplier for advice who said the thermostat is ok, its the timer which is the problem (no kidding!) So I went out and got a different digital timer which so far hasn't blown the thermostat. Finger crossed it will be ok now
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|