02-02-2011, 05:10 PM | #1 |
Member
Egg
Join Date: May 2010
Posts: 57
|
Drainage layer
Thinking about humidity, has anyone experimented using a drainage sub level to maintain humidity levels? Interested in your thoughts. Stephen
|
02-02-2011, 05:45 PM | #2 |
Super Moderator
Adult
Join Date: Dec 2008
Location: Sunny Scotland
Posts: 21,512
|
hadn't thought about it but maybe it's an idea
|
02-02-2011, 05:57 PM | #3 |
Member
Egg
Join Date: May 2010
Posts: 57
|
There is clay based Substance called hydro drain which with holds water. The idea is that you place a "fleece" that allows water to seep through but not the substrate. Almost seems to good to be true. My concern would be damp + warm = bacteria. But it is used for vivs.
|
02-02-2011, 06:29 PM | #4 | |
Super Moderator
Adult
Join Date: Jan 2007
Location: Hull
Posts: 7,286
|
Quote:
Thinking on a layer of crushed Common brick's would have a similar effect.
__________________
Paul. |
|
04-02-2011, 06:54 PM | #5 |
Member
Egg
Join Date: May 2010
Posts: 57
|
Did the stuff at work do the job?
|
04-02-2011, 07:35 PM | #6 |
Super Moderator
Adult
Join Date: Jan 2007
Location: Hull
Posts: 7,286
|
Yes it did for a while about 4 years, then it needed replenishing, as these were small clay beads, this was on a golf green. I still think a layer of broken bricks like a (we call them common's) or london brick would have a similar effect. Take one dry and place in a bucket of water after a few hours it is soaked all the way through, and takes hours to dry out again.
Other option is to rig a garden irrigation system like the auto greenhouse ones, for a spray humidity they have become cheaper now.
__________________
Paul. |
04-02-2011, 11:03 PM | #7 |
Member
Egg
Join Date: May 2010
Posts: 57
|
I have given that some thought. I am just about to put my torts into larger housing so i will probably splash out on the new heating and lighting systems first. Thanks for your thoughts Paul.
Stephen |
05-02-2011, 04:33 PM | #8 |
Super Moderator
Adult
Join Date: Jan 2007
Location: Hull
Posts: 7,286
|
I thought we were talking about outside enclosures lol, indoors the clay beads would have to be seperated some how from the substrate layer, can't thing how, but it would act like a sump for water.
__________________
Paul. |
05-02-2011, 09:56 PM | #9 |
Member
Egg
Join Date: May 2010
Posts: 57
|
Thanks Paul. I'll just keep experimenting. Incidentlly you are just over the water from me. I live in market Rasen Stephen
|
07-02-2011, 05:16 AM | #10 |
Junior Member
Egg
Join Date: Jan 2010
Location: Nebraska, USA
Posts: 17
|
I sort of use a drainage layer for my Red-foots in a 48" x 20" habitat with a couple inches of cypress mulch overall. At the bottom of the habitat, I have some hardware mesh with some waterproof heating rope wire-tied to it (http://www.bigappleherp.com/Big-Appl...ble-Heat-Ropes).
I water the substrate, it settles to the heated layer, heats up and spreads the heat evenly while the heated water also generates humidity from the bottom. The heat 'supercharges' the humidity- the habitat's walls are usually fogged over and I need to add about 1.5 liters a day to keep it 'charged'. When I had a previous habitat without the heating rope, it did not produce humidity nearly as well here in Omaha Nebraska, USA
__________________
Mark, in Nebraska USA. Librarian for the Tortoise Library, helping keepers raise healthy tortoises, especially Red-foots. 0.0.4 Cherry-head Red-foot Tortoises |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|